Ratchet Tie Down For Europe EN12195-2

Short Description:

Ratchet Tie Down for Europe (Ratchet Lashing Strap)

We manufactures a comprehensive range of 25mm, 35mm, 50mm and 75mm cargo straps, in the forms of one part endless ratchet straps or a two part strap with end fittings.

Properties

– Minimal elongation in the belt reduces the chance of re-tensioning.

– Die Cast Zinc Cam Buckle.

– Available with 800kg, 1000kg, 2000kg, 3000kg, 4000kg 5000kgs, 10000kgs

Standard delivery

– Packed in POF membrane with Color Insert Card and Test Certificate.

– Or packed in Blister, Display Box, Display Racks, etc.

Norm:

– EN12195-2


Details

CAD Chart

Warning

Product Tags

Product Features:

• Complies with European Standard EN12195-2

• Achieves a rated assembly strength (RAS) of LC250daN (250kgf). LC is the Lashing Capacity and the maximum force that can to be applied in a straight pull.

• Regular lash sizes of 3m, 5m and 6m.

• Made from high quality polyester webbing.

• Die Cast Zinc Cam Buckle.

• All webbing sewn with high quality polyester thread.

• Bespoke Cam Buckle straps can be supplied in most colors and to any size. Special security printing service can put your name/logo onto the webbing.

 

50mm Cargo Lashing LC 2500daN, Ergo Buckle
Item Series Stf Lashing
Capacity
Lashing
Capacility
reeved
Lashing
Capacility
endless
Webbing
Width
Length Buckle End Fitting
(daN) (daN) (daN) (daN) (mm) (m)
50RE2500GH 400 2500 5000 50 8.6+0.4 White Zinc
Plastic Handle
Grab Hook
50mm Cargo Lashing LC 2500daN, Regular Buckle
Item Series Stf Lashing Capacity Lashing Capacility
reeved
Lashing Capacility
endless
Webbing
Width
Length Buckle End Fitting
(daN) (daN) (daN) (daN) (mm) (m)
50R2500CJ 300 2500 5000 50 8.6+0.4 Yellow Zinc
Plastic Handle
Closed J Hook
50R2500OU 300 2500 5000 50 8.6+0.4 Yellow Zinc
Plastic Handle
Open U Hook
50R2500SJ 300 2500 5000 50 8.6+0.4 Yellow Zinc
Plastic Handle
Single J Hook
50R2500GH 300 2500 5000 50 8.6+0.4 Yellow Zinc
Plastic Handle
Grab Hook
50mm Cargo Lashing LC 2000daN, Regular Buckle
Item Series Stf Lashing Capacity Lashing Capacility
reeved
Lashing Capacility
endless
Webbing
Width
Length Buckle End Fitting
(daN) (daN) (daN) (daN) (mm) (m)
40R2000CJ 300 2000 4000 50 8.6+0.4 Yellow Zinc
Plastic Handle
Closed J Hook
40R2000OU 300 2000 4000 50 8.6+0.4 Yellow Zinc
Plastic Handle
Open U Hook
35mm Cargo Lashing LC 1500daN, Regular Buckle
Item Series Stf Lashing Capacity Lashing Capacility
reeved
Lashing Capacility
endless
Webbing
Width
Length Buckle End Fitting
(daN) (daN) (daN) (daN) (mm) (m)
35R1500CJ 180 1500 3000 35 5.6+0.4 Yellow Zinc
Plastic Handle
Closed J Hook
35E1500NH 180 1500 3000 35 6 Yellow Zinc
Plastic Handle
No Hook
35mm Cargo Lashing LC 1000daN, Regular Buckle
Item Series Stf Lashing Capacity Lashing Capacility
reeved
Lashing Capacility
endless
Webbing
Width
Length Buckle End Fitting
(daN) (daN) (daN) (daN) (mm) (m)
35R1000CJ 120 1000 2000 35 4.6+0.4 Yellow Zinc
Steel Handle
Closed J Hook
35E1000NH 120 1000 2000 35 5 Yellow Zinc
Steel Handle
No Hook
25mm Cargo Lashing LC 750daN/400daN, Regular Buckle
Item Series Stf Lashing Capacity Lashing Capacility
reeved
Lashing Capacility
endless
Webbing
Width
Length Buckle End Fitting
(daN) (daN) (daN) (daN) (mm) (m)
25R750CJ 100 750 1500 25 4.6+0.4 Yellow Zinc
Steel Handle
Closed J Hook
25E750NH 100 750 1500 25 5 Yellow Zinc
Steel Handle
No Hook
25R400CJ 70 400 800 25 4.6+0.4 Yellow Zinc
Steel Handle
Closed J Hook
25E400NH 70 400 800 25 5 Yellow Zinc
Steel Handle
No Hook

  • Previous:
  • Next:

  • Tag2 Product CAD chart

    Useful Information on Cargo Control

    SPC cargo lashing are manufactured according to the European standard EN 12195-2. This standard specifies the LC (Lashing Capacity) in daN.

    The primary requirements in the EN 12195-2 standard are:

    – The hardware, i.e. the ratchet and hooks, must have a safety factor of at least to have 2x the LC value.

    – The strap, unmodified, must have a safety factor of at least 3x the LC value.

    – The entire lashing system must have a failure rating of at least twice the LC value.

     

    Explanation of lashing strap label

    According to the EN 12195-2 standard, tension straps must be provided with a label with instructions shown on it. This label must be attached to both the ratchet part (the strap fabric that is attached to the ratchet) and the tension part of the tension strap. For polyester tension straps, the label must be blue.

    The blue label that is attached to the tension strap contains certain fixed pieces of information:

    1. LC1 = Lashing capacity (for tension in straight line)

    2. LC2 = Lashing capacity (by strapping)

    3. SHF = Standard Hand Force

    4. STF = Standard Tension Force

    5. Material type of the strap (as a rule PES, polyester)

    6. Stretch percentage of the strap material (max. 7% permissible)

    7. Length (of the ratchet part or the tension part; the example illustrates the ratchet part)

    8. S/N = serial number (of the relevant lashing strap)

    9. Warning: “not for lifting”

    10. Name or logo of the manufacturer

    11. EN 12195-2: all REMA cargo lashing are produced to the European Standard EN 12195-2

    12. Production month/year

     

    Subject 1: How to understand Lashing Capacity

    The LC value is important.

    – The LC value is only important for diagonal lashing.

    – With this securing method, at least four lashing systems must be used (Fig. 2).

    – The LC value in combination with the vertical lashing angle and the horizontal angle β are important.

    – The vertical lashing angle α between the load floor and the lashing system must be between 20° and 65° (Fig. 1).

    – The horizontal lashing angle β between the long axis of the load and the lashing system must be between 6° and 55° (Fig. 2).

     

    Subject 2: How to understand Standard Tension Force (Stf)

    The Stf value is crucial.

    – The most common method of fixing down loads is lashing down; by this means, the load is pressed firmly’ on to the load floor (Fig. 3).

    – Important with this method of lashing down is the amount of force used for this, in other words how much tension can be build up in the lashing system.

    – The LC (Lashing Capacity) plays no role in this, but the tensioning of the system is important; this is indicated on the blue REMA label of the lashing system by Stf in daN (Standard tension force).

    – This Stf value is measured with an Shf (Standard hand force) of 50 daN.

    – The Stf value must be between 10% and 50% of the LC value of the lashing system (it is mainly determined by the quality and type of the ratchet).

    – When lashing down, at least two lashing systems must be used, and the angle α should be kept as large as possible (Fig. 3). Angle α must be between 35° and 90°.

  • Send your message to us:

    Write your message here and send it to us

    Send your message to us:

    Write your message here and send it to us